抖阴旅行射

Shrinkage occurs听in the production of pottery and affects pottery at two stages in the process, during both drying and firing. During the drying stage, the wet clay loses its water and contracts, producing the first phase of shrinkage. Although a vessel may feel dry to the touch after drying in the open air for weeks, it still contains chemical water in its fabric and, therefore, the process of water loss and shrinkage continues during firing. The final dried-and-fired product, then, will be smaller than the vessel immediately after it was formed from wet clay.听

Different clay bodies have different rates of shrinkage based on the amount of actual clay they contain. A potter must know the shrinkage rate of their clay body so that they can adjust the shrinkage rates of the glaze or slip decoration to fit.听If the potter fails to do this, the clay body and glaze or slip will shrink at different rates. If slip has a different shrinkage rate than the clay body, for example,听it will flake off. If glaze, however, has a lower shrinkage rate than the clay body, the result is called crazing, a process that produces fine cracks on the surface. The opposite, shivering, is when glaze comes off the vessel or cracks it听(1).听

This essay was written to accompany a听collection of Greek artifacts at the 抖阴旅行射 Art Museum.听

Footnote

1. Susan Peterson,听The Craft and Art of Clay听(Englewood Cliffs, N.J.: Prentice Hall, 1996); Toby Schreiber,听Athenian Vase Construction: A Potter's Analysis听(Malibu: The J. Paul Getty Museum, 1999):听24-5, 203.